PADI SideMount Scuba - Single Cylinder Speciality

This product is out of stock, however you might like these alternatives:

Out of stock
Item ID
PADI SideMount Scuba - Single Cylinder Speciality

Other ways to get in touch

What do you get?

4-5 Hour Classroom theory session or sessions covering

1. Cylinders Types, Handling, Valves & Markings
2. Cylinder Valves types
3. Compressor types
4. Types of cascade system/banks & filling/mixing panels
5. Types of filling whips and valve
6. Wet and dry filling
7. Compressor maintenance
8. Compressor filters
9. Types of Air, Nitrox and other Gases
10. Filling cylinders direct from compressor
11. Filling cylinders via a cascade system
12. Filling cylinders using a combination of cascade system and compressor

Practical Exercises

1. Fill cylinders at least 4 times via a compress
2. Fill cylinders at least 4 times cascade/Bank system
3. Fill cylinders at least 4 times using a combination of both cascade/Bank system and compressor
4. Complete a practical training record sheet

By the end of this course the student will be able to

1. Identify different types of cylinder including 300 Bar, 232 Bar
2. Identify manufacture dates and test dates on cylinders
3. Verify that a cylinder is within test dates & required locally
4. Identify Nitrox and Air cylinders correctly
5. Identify all of the primary controls on the filling panel and / or compressor being used.
6. Independently fill cylinders using all three combinations and verify that they havebeen filled to the correct filling pressure.

Fill cylinders via a compressor
Fill cylinders via a cascade/Bank system
Fill cylinders using a combination of both cascade/Bank

Where is it? and When?

We run regular courses though out the year so give us a call or pop in to book a course.

Classroom sessions will be in our purpose built classrooms at our Dive Centre in St. Leonards and the Hands on   practical Cylinder filling and Compressor operation sessions will be at our shop  TAL Scuba Ltd, Fairmile Road , Christchurch 

How do I do it? - What do I need to do?

  • You need to be at least 15 years old
  • Give us a call or pop into the shop and book it. 

What's Next?

Now you have mastered how to use a compressor The Gas Blender course will train you as a qualified gas blender, allowing you to provide gas mixes to appropriately certified consumers. You'll learn the physical properties of oxygen, its associated hazards, handling requirements and what cleaning equipment is necessary. Finally, you will learn the five methods of obtaining the desired Enriched Air Nitrox ( EAN ) mix and the various methods used to obtain proper helium mixes. 

Course Details:


Prerequisites: None
Length Approx 4-5 Hours Classroom Plus Practical Participants: 1-8
Write Your Own Review
You're reviewing:PADI SideMount Scuba - Single Cylinder Speciality
Your Rating
Copyright © 2013-present Shootingandscuba. All rights reserved.